DPPV-3FBA-RG
DPPV (+100 psi to -25" Hg) pump, 3/8" FBSPP gauge adapter, 1m hose, 1/4” FBSPP process conn.
Create pressure or vacuum and calibrate instrumentation using a pressure gauge or calibrator attached to the pump (gauge or calibrator not included)
- Generate either 125 psi (8.6 bar) pressure or -25In Hg (-635 mm Hg) vacuum with the same pump
- Unique design allows the user to convert from pressure to vacuum by simply twisting a knob, even with gloves on
- Two outlet ports allow connection to reference pressure gauge or pressure calibrator as well as device under test, thus eliminating a tee
- Large volume fine adjustment piston provides precise control, even at very low pressures
- Precisely vent pressure with soft seated bleed valve
- Made in U.S.A.
Item Includes
- Hand Pump - DPPV Assembly (DPPV)
- Gauge Adapter - G 3/8" female BSPP (ISO 228/1) x female Quick-test, no check-valve, brass (QTHA-3FBA-RG)
- Hose - Quick-test 6900 psi hose, brass hose ends, 1 m (3.3 ft) long (QTQT-HOS-1m)
- Hose Adapter - G 1/4" female BSPP (ISO 228/1) x male Quick-test, no check-valve, brass (QTHA-2FB0-RG)
| Pressure Range | 0 to 100 psi (0 to 7 bar) |
|---|---|
| Vacuum Range | 0 to 23"Hg (0 to 584 mmHG) |
| Media | Air |
| Outlet Port 1 | Male Quick-test outlet port, no check-valve, brass |
| Outlet Port 2 | Male Quick-test outlet port with cap and chain, brass |
| Temperature range | 0 to 130 °F (-18 to 54 °C) |
| Construction | Anodized Aluminum, Brass, Stainless Steel |
| Seal materials | Buna-N, Delrin, Teflon |
| Fine adjust resolution | ±0.01 psi |
| Weight | 1.92 lb (0.9 kg) |
| Dimensions | H: 3.63 in (9.2202 cm) x W: 8.5 in (21.59 cm) x D: 3.63 in (9.2202 cm) |
DPPV pump body, aluminum
DPPV-0005
DP0V, DV0V, DPPV pumping piston assembly
DP0V-0015
