QTHA-TVLB
In-line vent valve - male QT x male, brass
Connect this valve in between the pressure calibrator and device under test. When testing is complete use the vent valve to bleed pressure from the device under test and none of the process fluid will contaminate the calibrator or hand pump
| Pressure Range | 0 to 3000 psi (0 to 207 bar) |
|---|---|
| End C1 | Male Quick-test |
| End C2 | Male Quick-test |
| Has Block Valve | No |
| Has Vent Valve | Yes |
| Maximum Working Temperature | 140 °F (60 °C) |
| Construction | Brass |
| Seal materials | Buna-N, Delrin |
| Dimensions A | 1.5 in (3.81 cm) |
| Dimensions B | 2 in (5.08 cm) |
