Install between a pressure gauge and the process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system.
- * Use whenever there is a gauge that needs frequent calibration or verification
Select a model for more information
|Model||End 1||End 2||Block Valve||Vent Valve||Material||Working Pressure|
|QTVF-000B||1/4" Male NPT||1/4" Female NPT||Yes||No||Brass||3000 PSI|
|QTVF-000B-2F-2F||1/4" Female NPT||1/4" Female NPT||Yes||No||Brass||3000 PSI|
|QTVF-000S||1/4" Male NPT||1/4" Female NPT||Yes||Yes||Stainless Steel||3000 PSI|
|QTVF-000S-2F-2F||1/4" Female NPT||1/4" Female NPT||Yes||No||Stainless Steel||3000 PSI|