QTVF-000B
Shut-off valve - 1/4" MNPT x 1/4" FNPT with male QT test port, brass
Install between a pressure gauge and the process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system.
- * Use whenever there is a gauge that needs frequent calibration or verification
| Pressure Range | 0 to 3000 psi (0 to 207 bar) |
|---|---|
| End C1 | 1/4" Male NPT |
| End C2 | 1/4" Female NPT |
| End C3 | Male Quick-test with Cap and Chain |
| Has Block Valve | Yes |
| Has Vent Valve | No |
| Temperature range | 0 to 140 °F (-18 to 60 °C) |
| Construction | Brass |
| Seal materials | Buna-N, Delrin, Teflon |
| Dimensions A | 2.6 in (6.60 cm) |
| Dimensions B | 2.5 in (6.35 cm) |
Needle valve assembly, brass
AS-QTHA-0109-BR