This product has been replaced by DP0V-100PSIG-FL and is no longer available for purchase. Replacement parts are still available.

AP0V-100PSIG-FL

Calibration kit, AP0V pneumatic pump, 100 psi / 7 bar / 700 kPa FieldLab (0.1% of reading Accuracy)

AP0V-100PSIG-FL

Calibrate pressure instrumentation to 300 psi with air using the included pressure gauge.

Specifications

Weight 59.04 oz / 3.69 lbs / 1.67 kg
Length 8.1 in / 21 cm
Width 9 in / 23 cm
Height 3.5 in / 89 mm
Pressure Reference Pressure FieldLab, 500 psi / 35 bar / 3.5 MPa
Process Connection 1/4" Male NPT
Reference Connection None
Materials Anodized Aluminum, Brass
Seal Materials Buna-N, Delrin, Teflon
Max Pressure 300 PSI / 21 bar / 2.10 MPa
Min Temperature 0 °F / -18 °C
Max Temperature 130 °F / 54 °C

Hand Pump AP0V

Max Pressure 300 PSI / 21 bar / 2.10 MPa
Min Temperature 0 °F / -18 °C
Max Temperature 130 °F / 54 °C
Pressure Media Air
Fine Adjustment Resolution 0.01 PSI / 0 mbar / 0.00 kPa
Materials Anodized Aluminum, Brass, Plated Steel
Media Compatibility Air, Inert Gas, Natural Gas
Seal Materials Buna-N, Delrin
Outlet Port Male Quick-test, Male Quick-test with cap and chain

Gauge FLP1-GJ-QM

Burst Pressure 4X PSI / 28 mbar / 28 kPa
Certifications Certified to CSA Standard C22.2 No. 61010-1, Conforms to UL Standard No. 61010-1, North America - Class 1 Division 1 Groups A-D, T4, (-10 < Ta < 50°C), ATEX - Ex II 1 G Ex ia IIC T4 Ga (-10 < Ta < 50 °C), IECEx - Ex ia IIC T4 Ga (-10 < Ta < 50 °C)
Charging AC Power (Australia, China, Europe, North America, UK adapters included), DC Auto power (Optional)
Datalogging 2 million points
Ingress Protection IP67 (1 meter water submersion for 30 minutes)
LCD Display 3.5 in / 90mm Color TFT LCD Display
Materials 316 Stainless Steel, Reinforced Polyamide
Max Pressure 100 PSI / 7 bar / 700 kPa
Max Storage Temperature 167 °F / 75 °C
Max Temperature 122 °F / 50 °C
Max Vacuum 30 In Hg / 77 cm Hg
Measurement Type Gauge Pressure
Media Compatibility Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
Min Storage Temperature -20 °F / -29 °C
Min Temperature 14 °F / -10 °C
Mounting Holes 3 x M5 Inserts (10 mm deep)
Pressure Measurement Uncertainty +/- 0.02% of Full Scale (0-20% of Full Scale), +/- 0.1% of Reading (20-100% of Full Scale), +/- 0.25% of Full Scale (Vacuum)
Process Connection Male Quick-test
Relative Humidity 0% to 90% (-10 to 35°C), 0% to 70% (35 to 50°C)
Seal Materials Teflon, Viton
Sensor Type High Precision MEMS
USB Connection USB (Type B)
Wetted Materials 316 Stainless Steel
End 1 Connector Male Quick-test
End 1 Bulkhead Seal No
End 1 Cap and Chain No
End 1 Quick Disconnect No

Process Connection QTHA-2MB0

Has Check Valve No
Materials Brass
Max Pressure 5000 PSI / 345 bar / 35 MPa
Max Temperature 225 °F / 105 °C
Max Vacuum 0 In Hg / 0.00 mm Hg
Min Temperature 0 °F / -18 °C
Seal Materials Buna-N
Wrench Size 9/16 In / 15 mm
Wrench Size 15 mm / 9/16 in
End 1 Connector 1/4" Male NPT (ASME B1.20.1)
End 1 Bulkhead Seal No
End 1 Cap and Chain No
End 1 Quick Disconnect No
End 2 Connector Male Quick-test
End 2 Bulkhead Seal No
End 2 Cap and Chain No
End 2 Quick Disconnect No

Hose QTQT-HOS-3ft

Burst Pressure 27000 PSI / 1860 bar / 185 MPa
Color Silver
Fluid Media Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water
Inner Diameter 0.08 In / 3.00 mm
Length 3 ft / 92 cm
Materials Brass
Max Pressure 6900 PSI / 475 bar / 48 MPa
Max Temperature 140 °F / 60 °C
Max Vacuum 0 In Hg / 0.00 mm Hg
Min Temperature -40 °F / -40 °C
Minimum Bend Radius 1 In / 26 mm
Outer Diameter 0.2 In / 6.00 mm
Type QT
Hose End 1 Female Quick-test, brass
Hose End 2 Female Quick-test, brass

Included Items

FieldLab Carrying Case

FieldLab Carrying Case

DGAU-0370

USB cable, Straight A x Right Angle B, shielded, grey, 2 meters long

USB cable, Straight A x Right Angle B, shielded, grey, 2 meters long

DGAU-0191

FieldLab AC Power Charger Kit

FieldLab AC Power Charger Kit

DGAU-0163

Replacement Parts

APGV, AP0V pump repair kit

APGV, AP0V pump repair kit

QTAP-REPK

APGV, AP0V, DP0V, DV0V, DPPV, QTCM bleed valve assembly, brass

APGV, AP0V, DP0V, DV0V, DPPV, QTCM bleed valve assembly, brass

DP0V-0020

APGV, AP0V, VPGV vernier assembly

APGV, AP0V, VPGV vernier assembly

QTAP-0002

APGV, AP0V outlet check-valve assembly

APGV, AP0V outlet check-valve assembly

QTAP-0003

AP pump piston assembly with inlet check-valve, spring

AP pump piston assembly with inlet check-valve, spring

QTAP-0007

AP0V pumping cylinder (aluminum)

AP0V pumping cylinder (aluminum)

QTAP-0008

APGV, AP0V, APG0 (1) Handle, (1) link, (2) mounting rivets

APGV, AP0V, APG0 (1) Handle, (1) link, (2) mounting rivets

QTAP-0010

AP0V body casting, painted

AP0V body casting, painted

QTAP-0014

Replacement outlet port for AP0V hand pumps, with cap and chain

Replacement outlet port for AP0V hand pumps, with cap and chain

QTFT-3SB0-LV

Male Quick-test outlet port for APGV pumps

Male Quick-test outlet port for APGV pumps

QTHA-3SB0-LV

Looking for product pricing and availability?
Contact us for a quote and we'll be in touch.
Get a Quote
Distributors log in for pricing and availability

© Copyright 1997 - 2018 Ralston Instruments. All rights reserved. Privacy Policy