Perform very precise low pressure calibration or differential pressure calibration using an attached gauge or calibrator (gauge and calibrator not included)
| Weight | 1.61 lb / 730.28 g |
|---|---|
| Length | 2.87 in / 7.29 cm |
| Width | 7.93 in / 20.14 cm |
| Height | 3.50 in / 8.89 cm |
| Burst Pressure | 27,000 psi / 1,862 bar / 185 MPa |
| Color | Silver |
| Fine Adjustment Resolution | 0.010 PSI |
| Fluid Media | Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water |
| Hose 1 | Quick-test Hose, Stainless Steel ends, 2ft / 0.6m long |
| Inner Diameter | 0.08 in / 0.20 cm |
| Length | 3 ft / 91.44 cm |
| Materials |
Anodized Aluminum Brass Stainless Steel |
| Max Pressure | 125 psi / 9 bar / 860 kPa |
| Max Temperature | 130 °F / 54 °C |
| Media Compatibility |
Air Inert Gas Natural Gas |
| Minimum Bend Radius | 1.00 in / 2.54 cm |
| Outer Diameter | 0.20 in / 0.51 cm |
| Outlet Port |
Male Quick-test Male Quick-test with cap and chain |
| Pressure Media | Air |
| Pressure Reference | None |
| Process Connection | 1/4" Male NPT |
| Reference Connection | 1/4" Female NPT |
| Seal Materials |
Buna-N Delrin Teflon |
| Type | QT |
| Wrench Size | 3/4, 9/16 In |
| Wrench Size | 19, 15 mm |
DP0V, DV0V, DPPV fine adjustment vernier assembly
DP0V-0010
APGV, AP0V, DP0V, DV0V, DPPV, QTCM bleed valve assembly, brass
DP0V-0020
3/8-24 Male SAE X Male Quick-test outlet connection, brass
QTHA-3SB0
3/8-24 Male SAE X Male Quick-test outlet connection with cap and chain, brass
QTFT-3SB0
Enter your ZIP code to find the closest distributor to you.