Replacement Parts
Replacement parts for hand pumps, calibration manifolds, nitrogen sources and volume contollers
- Made in the USA
Select a model for more information
| Model | Description | Material |
|---|---|---|
| QTHA-HSBG | QTCM, QSCM bag, holds manifold, hoses and adapters, zippered nylon | Zippered Nylon |
| AS-QTHA-0109-BR | Needle valve assembly, brass | Brass |
| AS-QTHA-0109-SS | Needle valve assembly, S.S. | Stainless Steel |
| DP0V-0005 | DP0V, DV0V pump body, aluminum | Anodized Aluminum |
| DP0V-0010 | DP0V, DV0V, DPPV fine adjustment vernier assembly | Anodized Aluminum, Brass |
| DP0V-0015 | DP0V, DV0V, DPPV pumping piston assembly | Anodized Aluminum, Brass |
| DP0V-0020 | APGV, AP0V, DP0V, DV0V, DPPV, QTCM bleed valve assembly, brass | Anodized Aluminum, Brass |
| DP0V-0040 | (2) DP0V pressure check valves, brass | None |
| DP0V-0045 | (2) DV0V vacuum check valves, brass | None |
| DPPV-0005 | DPPV pump body, aluminum | Anodized Aluminum |
| DPPV-0015 | DPPV Pumping piston assembly | Aluminum, Brass |
| DPPV-0025 | DPPV Pressure / vacuum spool valve assembly, brass | Aluminum, Brass |
| DPPV-0040 | (1) DPPV pressure check valve assembly, (1) DPPV vacuum check valve assembly, brass | None |
| NPAK-0001 | NPAK Tank valve block, aluminum | None |
| NPAK-0002 | NPAK Inlet port assembly, male Quick-test with cap and chain S.S. | Stainless Steel |
| NPAK-0004 | NPAK Overpressure burst disk (3000 psi / 200 pressure range) | None |
| NPAK-0006 | NPAK system fill valve assembly, knob, panel nut | Anodized Aluminum, Stainless Steel |
| NPAK-0008 | NPAK fill and bleed valve assembly, knob, panel nut | None |
| NPAK-0010 | NPAK fine adjust assembly without piston, knob, panel nut | None |
| NPAK-0012 | NPAK fine adust piston only | None |
| NPAK-0014 | NPAK fine adjust valve block, only | None |
| NPAK-0016 | NPAK dual scale pressure gauge (3000 psi / 210 bar) | Stainless Steel |
| NPAK-0020 | NPAK top portion of fine adjust assembly without piston (for #7) | Aluminum |
| NPAK-0030 | NPAK tank clamps, bracket and attachment bolts | None |
| NPAK-0035 | NPAK nitrogen cylinder (15.2 cu. ft / 430 l @ 3000 psi) | None |
| NPAK-0040 | NPAK replacement gas regulator | None |
| NPAK-0045 | NPAK tube connecting tank fill to regulator, with tube fittings | None |
| NPAK-0050 | NPAK tube connecting tank fill valve to "tank pressure" gauge | None |
| NPAK-0055 | NPAK tube connecting regulator to fine adjust vernier assembly | None |
| NPAK-0058 | NPAK tube connecting regulator to "regulated pressure" gauge | None |
| NPAK-0060 | NPAK tube connecting to top of fine adjust vernier, tube fittings | None |
| NPAK-0065 | NPAK tube connecting to bottom of fine adjust vernier, tube fittings | None |
| NPAK-0070 | NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. | Stainless Steel |
| NPAK-0075 | NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. | Stainless Steel |
| NPAK-0080 | NPAK gauge compartment with foam liner | None |
| NPAK-0085 | NPAK replacement control panel | None |
| NPAK-0090 | NPAK replacement case with reinforced steel panel ring | None |
| NPAK-HSBG-VC | NPAK bag to hold hoses and adapters in Nitropak, zippered nylon with Velcro | Zippered Nylon with Velcro |
| AS-QTFT-CAPS | NPAK Cap, plug, chain and hanger ring to cover inlet, outlet ports, S.S. | None |
| QSCM-0020 | QSCM bleed valve assembly, S.S. | Stainless Steel |
| QSCM-0024 | QSCM calibration manifold body, S.S. | Stainless Steel |
| QSCM-0025 | QSCM fill valve assembly, S.S. | Stainless Steel |
| QSCM-0027 | QSCM Fine adjust vernier assembly, S.S. | Stainless Steel |
| QTAP-0002 | APGV, AP0V, VPGV vernier assembly | None |
| QTAP-0003 | APGV, AP0V outlet check-valve assembly | None |
| QTAP-0004 | APG0 outlet check-valve assembly | None |
| QTAP-0005 | APG0 pumping cylinder (aluminum) with (1) ell installed | None |
| QTAP-0006 | APGV pumping cylinder (aluminum) with (1) ell installed | Anodized Aluminum, Brass |
| QTAP-0007 | AP pump piston assembly with inlet check-valve, spring | Aluminum, Brass |
| QTAP-0008 | AP0V pumping cylinder (aluminum) | Anodized Aluminum |
| QTAP-0010 | APGV, AP0V, APG0 (1) Handle, (1) link, (2) mounting rivets | Plated Steel |
| QTAP-0013 | APGV, APG0 body casting, painted with (1) ell installed | None |
| QTAP-0014 | AP0V body casting, painted | None |
| QTAP-0018 | APGV, APG0 gauge tube only | None |
| QTCM-0016 | QTCM calibration manifold body, brass | None |
| QTCM-0021 | QTCM fill valve assembly, brass | Anodized Aluminum, Brass |
| QTCM-0026 | Replacement vernier for QTCM manifolds, brass | Anodized Aluminum, Brass |
| QTHP-0002 | HP, XH pump liquid reservoir vent plug with integral pressure relief valve, brass | None |
| QTHP-0004 | HP, XH pump liquid reservoir bolt, washer and o-ring | None |
| QTHP-0006 | HP, XH pump liquid reservoir top casting, brass | None |
| QTHP-0008 | HP, XH inlet check-valve, spring and plug, brass | None |
| QTHP-0010 | HP, XH outlet check-valve, spring and plug, brass | None |
| QTHP-0012 | HPGV pump body casting with piston (3000 psi / 210 bar) | Brass, Stainless Steel |
| QTHP-0014 | HPGV, XHGV fine adjust vernier piston assembly, brass | None |
| QTHP-0015 | XHGV pump body casting with piston (5000 psi / 350 bar) | None |
| QTHP-0020 | HP, XH moveable handle assembly, rivets, roller | None |
| QTHP-0022 | HP, XH fixed handle assembly, rivets | None |
| QTHP-0026 | HPGV, XHGV bleed valve assembly (black round knob) | Brass, Stainless Steel |
| QTHP-GASK | (1) HP, XH liquid reservoir gasket | None |
| QTHP-HYDL | Bottle of ISO-32 hydraulic calibration oil, 12 fl oz (355 ml ) | None |
| QTHP-RESV | Polycarbonate Liquid reservoir and (2) gaskets | None |
| QTVC-0002 | QTVC fill valve assembly | None |
| QTVC-0006 | QTVC balance valve assembly | None |
| QTVC-0010 | QTVC bleed valve assembly | None |
| QTVC-0014 | QTVC body, bottom plate | Aluminum |
| QTVC-0018 | QTVC fine adjust piston only | Aluminum, Brass |
| QTVC-0020 | QTVC top portion of fine adjust assembly without piston | Aluminum, Anodized Aluminum |
| QTVC-0024 | QTVC front panel | Plated Steel |
| DP0V-CASE | DP0V, DPPV pump carrying case holds (1) pump, (2) gauges, ABS plastic | ABS Plastic |
| QTAP-CASE | APGV, AP0V pump carrying case holds (1) pump, (2) gauges, ABS plastic | ABS Plastic |
| QTHP-CASE | HPGV, XHGV, HP0V, XH0V pump carrying case holds (1) pump, (2) gauges, ABS plastic | None |
| QTVC-LKIT | QTVC Laboratory stand (included with all volume controller kits) | Plated Steel, Stainless Steel |
| NPAK-STRP | NPAK, QTVC padded adjustable shoulder strap, black nylon, steel hardware | None |
| DP0V-REPK | DP0V pump repair kit | Brass |
| DV0V-REPK | DV0V pump repair kit | Brass |
| DPPV-REPK | DPPV pumps repair kit, includes (1) pressure and (1) vacuum check valve | Brass |
| NPAK-REPK | NPAK nitrogen calibration source repair kit | None |
| QTAP-REPK | APGV, AP0V pump repair kit | Plated Steel, Stainless Steel |
| QTCM-REPK | QTCM, QSCM manifold repair kit | None |
| QTHP-REPK | HPGV, XHGV, HP0V, XH0V pump repair kit | Brass, Plated Steel, Stainless Steel |
| QTVC-REPK | QTVC volume controller repair kit | None |
| TRAP-REPK | NPAK-TRS0 and NPAK-TRS0-2MS0-2FSA repair kit | None |