DPPV-0000
DPPV pump, no gauge adapter, with hose and process connection
Generate either a vacuum or a pressure for calibrating low pressure or vacuum instrumentation using an external pressure calibrator
- Generate either 100 psi (7 bar) pressure or -25” Hg (-635 mm Hg) vacuum with the same pump
- Unique design allows the user to convert from pressure to vacuum by simply twisting a knob, even with gloves on
- Two outlet ports allow connection to reference pressure gauge or pressure calibrator as well as device under test, thus eliminating a tee
- Large volume fine adjustment piston provides precise control, even at very low pressures
- Precisely vent pressure with soft seated bleed valve
- Made in U.S.A.
Item Includes
- Hand Pump - DPPV Assembly (DPPV)
- Hose - Quick-test hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft)
- Hose Adapter - 1/4" male NPT x male QT, no check-valve, brass (QTHA-2MB0)
| Pressure Range | 0 to 100 psi (0 to 7 bar) |
|---|---|
| Vacuum Range | 0 to 23"Hg (0 to 584 mmHG) |
| Media | Air |
| Outlet Port1 | Male Quick-test, brass |
| Outlet Port2 | Male Quick-test with cap and chain, brass |
| Temperature range | 0 to 130 °F (-18 to 54 °C) |
| Construction | Anodized Aluminum, Brass, Stainless Steel |
| Seal materials | Buna-N, Delrin, Teflon |
| Fine adjust resolution | ±0.01 psi |
| Weight | 1.71 lb (0.8 kg) |
| Dimensions | H: 3.63 in (9.2202 cm) x W: 8.5 in (21.59 cm) x D: 3.63 in (9.2202 cm) |
DPPV pump body, aluminum
DPPV-0005
DPPV fine adjustment vernier assembly
DP0V-0010
Male Quick-test, brass
QTHA-3SB0
DPPV Pumping piston assembly
DPPV-0015
