QTHA-BLB0-HH
Block & bleed valve - male Quick-test inlet x male Quick-test outlet, brass
Keep a calibration system pressurized with a fluid or gas while venting the pressure from the device being calibrated
| Pressure Range | 0 to 3000 psi (0 to 207 bar) |
|---|---|
| End C1 | Male Quick-test |
| End C2 | Male Quick-test |
| Has Block Valve | Yes |
| Has Vent Valve | Yes |
| Temperature range | 0 to 140 °F (-18 to 60 °C) |
| Construction | Brass |
| Seal materials | Buna-N, Delrin, Teflon |
| Dimensions A | 3.55 in (9.02 cm) |
| Dimensions B | 2.31 in (5.87 cm) |
Needle valve assembly, brass
AS-QTHA-0109-BR