NPAK-1KPSIG-D

Nitropak, 1000 PSI digital gauge, 6ft, 3ft hoses, (2) 1/4” MNPT process connections

NPAK-1KPSIG-D

Complete kit includes nitrogen source, pressure gauge and all fittings and adapters to perform differential and static pressure calibrations using nitrogen

Specifications

Weight 28.80 lb / 13.06 kg
Length 1 ft 6 in / 46.99 cm
Width 1 ft 2 in / 37.08 cm
Height 7.50 in / 19.05 cm
Hose 1 Quick-test Hose, Brass ends, 6ft / 1.9m long
Hose 2 Quick-test Hose, Brass ends, 3ft / 0.9m long
Pressure Reference Digital pressure gauge, 1000 PSIG Pressure
Process Connection 1/4" Male NPT
Reference Connection 1/4" Female NPT
Materials ABS Plastic
Aluminum
Anodized Aluminum
Brass
Plated Steel
Stainless Steel
Zippered Nylon with Velcro
Seal Materials Buna-N
Delrin
Teflon
Max Pressure 3,000 psi / 207 bar / 21 MPa
Max Vacuum 10 inHg / 255 mmHg
Min Temperature -0 °F / -18 °C
Max Temperature 130 °F / 54 °C

Source NPAK

Max Pressure 3,000 psi / 207 bar / 21 MPa
Max Vacuum 10 inHg / 255 mmHg
Min Temperature -0 °F / -18 °C
Max Temperature 130 °F / 54 °C
Pressure Media Nitrogen, inert gas
Fine Adjustment Resolution .0005 PSI
Fill Vent Valves soft seated construction
Mechanical Rotation 42 turns (pressure balanced)
Cylinder Capacity 15.20 Sq Ft
Overpressure Relief 3,300 psi / 228 bar / 23 MPa
Internal Connections 1/8 in tubing (316 stainless steel)
Inlet Port Male Quick-test with cap and chain
Media Compatibility Air
Inert Gas
Natural Gas
Outlet Port Male Quick-test with cap and chain
Seal Materials Buna-N
Delrin
Teflon

Pressure Gauge LC10-GP2M

Battery Count 2
Battery Life 1500 Hours
Battery Type AA Alkaline (LR6)
Burst Pressure 4X
Certifications Certified to CSA Standard C22.2 No. 61010-1
Conforms to UL / IEC / EN / AS Standard No. 61010-1
Complies with Pressure Equipment Directive 2014/68/EU
Complies with Low Voltage Directive 2014/35/EU
Complies with Electromagnetic Compatibility Directive 2014/30/EU
Electrical Rating 50 mA @ 5 VDC
Engineering Units atm
bar
cmH2O @4°C
inH2O @39°C
kPa
MPa
mbar
psi
inHg @39°F
kgf / cm^2
mmHg @0°C
Torr
ftH2O @39°F
cmHg @ 0°C
oz / sqin
Ingress Protection IP67 (1 meter water submersion for 30 minutes)
LCD Display 2.4 in / 61 mm segmented LCD Display
Materials ABS / Polycarbonate Blend
Powder Coated Aluminum
Max Pressure 1,000 psi / 69 bar / 6.89 MPa
Max Storage Temperature 167 °F / 75 °C
Max Temperature 122 °F / 50 °C
Measurement Type Gauge Pressure
Media Compatibility Air
Inert Gas
Natural Gas
Petroleum Based Oil
Water
Min Storage Temperature -40 °F / -40 °C
Min Temperature -4 °F / -20 °C
Operating Altitude (max) 10,000 ft (3050 m)
Pressure Measurement Uncertainty +/- 0.25% of Full Scale (ASME Grade 3A/ISO Class 0.25)
Process Connection 1/4" Male NPT
Protection Class Pollution Degree 2 (UL / IEC 61010-1)
Relative Humidity 0% to 90% (-10 to 35°C)
0% to 70% (35 to 50°C)
USB Connection USB (Micro B)
Wetted Materials 316 Stainless Steel
Wrench Size 23 mm
Wrench Size 7/8 In

Gauge Connection QTHA-2FBA

Has Check Valve No
Materials Brass
Max Pressure 5,000 psi / 345 bar / 34 MPa
Max Temperature 225 °F / 107 °C
Max Vacuum 0.00 inHg / 0.00 mmHg
Wrench Size 3/4 In
Wrench Size 19 mm

Process Connection 1 QTHA-2MB0

Has Check Valve No
Materials Brass
Max Pressure 5,000 psi / 345 bar / 34 MPa
Max Temperature 225 °F / 107 °C
Max Vacuum 0.00 inHg / 0.00 mmHg
Min Temperature -0 °F / -18 °C
Seal Materials Buna-N
Wrench Size 9/16 In
Wrench Size 15 mm

Hose 1 QTQT-HOS-6ft

Burst Pressure 27,000 psi / 1,862 bar / 185 MPa
Color Silver
Fluid Media Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water
Inner Diameter 0.08 in / 0.20 cm
Length 6 ft / 1.83 m
Materials Brass
Max Pressure 6,900 psi / 476 bar / 48 MPa
Max Temperature 140 °F / 60 °C
Max Vacuum 0.00 inHg / 0.00 mmHg
Min Temperature -40 °F / -40 °C
Minimum Bend Radius 1.00 in / 2.54 cm
Outer Diameter 0.20 in / 0.51 cm
Type QT

Hose 2 QTQT-HOS-3ft

Burst Pressure 27,000 psi / 1,862 bar / 185 MPa
Color Silver
Fluid Media Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water
Inner Diameter 0.08 in / 0.20 cm
Length 3 ft / 91.44 cm
Materials Brass
Max Pressure 6,900 psi / 476 bar / 48 MPa
Max Temperature 140 °F / 60 °C
Max Vacuum 0.00 inHg / 0.00 mmHg
Min Temperature -40 °F / -40 °C
Minimum Bend Radius 1.00 in / 2.54 cm
Outer Diameter 0.20 in / 0.51 cm
Type QT

Replacement Parts

NPAK Tank valve block, aluminum

NPAK Tank valve block, aluminum

NPAK-0001

NPAK Fill port assembly, male Quick-test with cap and chain S.S. (for #1)

NPAK Fill port assembly, male Quick-test with cap and chain S.S. (for #1)

NPAK-0002

NPAK Overpressure burst disk (3000 psi / 200 pressure range)

NPAK Overpressure burst disk (3000 psi / 200 pressure range)

NPAK-0004

NPAK System Fill Valve assembly, knob, panel nut (for #2)

NPAK System Fill Valve assembly, knob, panel nut (for #2)

NPAK-0006

NPAK Supply (#6) and Vent (#8) valve assembly, knob, panel nut

NPAK Supply (#6) and Vent (#8) valve assembly, knob, panel nut

NPAK-0008

NPAK fine adjust assembly without piston, knob, panel nut (for #7)

NPAK fine adjust assembly without piston, knob, panel nut (for #7)

NPAK-0010

NPAK fine adust piston only (for #7)

NPAK fine adust piston only (for #7)

NPAK-0012

NPAK Valve Block (for #6 and #8)

NPAK Valve Block (for #6 and #8)

NPAK-0014

3000 psi / 210 bar dual scale pressure gauge (for #4 and #5)

3000 psi / 210 bar dual scale pressure gauge (for #4 and #5)

NPAK-0016

NPAK top portion of fine adjust assembly without piston (for #7)

NPAK top portion of fine adjust assembly without piston (for #7)

NPAK-0020

NPAK tank clamps, bracket and attachment bolts

NPAK tank clamps, bracket and attachment bolts

NPAK-0030

NPAK nitrogen cylinder (15.2 cu. ft / 430 l @ 3000 psi)

NPAK nitrogen cylinder (15.2 cu. ft / 430 l @ 3000 psi)

NPAK-0035

NPAK replacement gas regulator (for #3)

NPAK replacement gas regulator (for #3)

NPAK-0040

NPAK tube connecting tank fill to regulator, with tube fittings

NPAK tube connecting tank fill to regulator, with tube fittings

NPAK-0045

NPAK tube connecting tank fill valve to "tank pressure" gauge

NPAK tube connecting tank fill valve to "tank pressure" gauge

NPAK-0050

NPAK tube connecting regulator to fine adjust vernier assembly

NPAK tube connecting regulator to fine adjust vernier assembly

NPAK-0055

NPAK tube connecting regulator to "regulated pressure" gauge

NPAK tube connecting regulator to "regulated pressure" gauge

NPAK-0058

NPAK tube connecting to top of fine adjust vernier, tube fittings

NPAK tube connecting to top of fine adjust vernier, tube fittings

NPAK-0060

NPAK tube connecting to bottom of fine adjust vernier, tube fittings

NPAK tube connecting to bottom of fine adjust vernier, tube fittings

NPAK-0065

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #9)

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #9)

NPAK-0070

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #10)

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #10)

NPAK-0075

NPAK gauge compartment with foam liner

NPAK gauge compartment with foam liner

NPAK-0080

NPAK replacement control panel

NPAK replacement control panel

NPAK-0085

NPAK replacement case with reinforced steel panel ring

NPAK replacement case with reinforced steel panel ring

NPAK-0090

NPAK bag to hold hoses and adapters in Nitropak, zippered nylon with Velcro

NPAK bag to hold hoses and adapters in Nitropak, zippered nylon with Velcro

NPAK-HSBG-VC

NPAK Cap, plug, chain and hanger ring to cover inlet, outlet ports, S.S.

NPAK Cap, plug, chain and hanger ring to cover inlet, outlet ports, S.S.

AS-QTFT-CAPS

Looking for product pricing and availability?
Contact us for a quote and we'll be in touch.
Get a Quote
Distributors log in for pricing and availability

© Copyright 1997 - 2018 Ralston Instruments. All rights reserved. Privacy Policy