NPAK-3KPSIG-FL

Calibration kit, NPAK Nitrogen source, 3000 psi / 200 bar / 20 MPa FieldLab (0.1% of Reading Acc.)

NPAK-3KPSIG-FL

Complete kit includes nitrogen source, pressure gauge and all fittings and adapters to perform differential and static pressure calibrations using nitrogen

Specifications

Weight 28.80 lb / 13.06 kg
Length 1 ft 6 in / 46.99 cm
Width 1 ft 2 in / 37.08 cm
Height 7.50 in / 19.05 cm
Hose 1 Quick-test Hose, Brass ends, 6ft / 1.9m long
Hose 2 Quick-test Hose, Brass ends, 3ft / 0.9m long
Pressure Reference Pressure FieldLab, 3000 psi / 200 bar / 20 MPa
Process Connection 1/4" Male NPT
Materials ABS Plastic
Anodized Aluminum
Stainless Steel
Seal Materials Buna-N
Delrin
Max Pressure 3,000 psi / 207 bar / 21 MPa
Max Vacuum 10 inHg / 255 mmHg
Min Temperature -0 °F / -18 °C
Max Temperature 130 °F / 54 °C

Gauge FLP1-GR-QF

Burst Pressure 4X
Certifications Certified to CSA Standard C22.2 No. 61010-1
Conforms to UL Standard No. 61010-1
North America - Class 1 Division 1 Groups A-D, T4, (-10 < Ta < 50°C)
ATEX - Ex II 1 G Ex ia IIC T4 Ga (-10 < Ta < 50 °C)
IECEx - Ex ia IIC T4 Ga (-10 < Ta < 50 °C)
Charging AC Power (Australia, China, Europe, North America, UK adapters included)
DC Auto power (Optional)
Datalogging 2 million points
Ingress Protection IP67 (1 meter water submersion for 30 minutes)
LCD Display 3.5 in / 90mm Color TFT LCD Display
Materials 316 Stainless Steel
Reinforced Polyamide
Max Pressure 3,000 psi / 207 bar / 21 MPa
Max Storage Temperature 167 °F / 75 °C
Max Temperature 122 °F / 50 °C
Measurement Type Gauge Pressure
Media Compatibility Air
Inert Gas
Natural Gas
Petroleum Based Oil
Water
Min Storage Temperature -20 °F / -29 °C
Min Temperature 14 °F / -10 °C
Mounting Holes 3 x M5 Inserts (10 mm deep)
Pressure Measurement Uncertainty +/- 0.02% of Full Scale (0-20% of Full Scale)
+/- 0.1% of Reading (20-100% of Full Scale)
+/- 0.25% of Full Scale (Vacuum)
Process Connection Female Quick-test
Relative Humidity 0% to 90% (-10 to 35°C)
0% to 70% (35 to 50°C)
Seal Materials Teflon
Viton
Sensor Type High Precision MEMS
USB Connection USB (Type B)
Wetted Materials 316 Stainless Steel

Source NPAK

Max Pressure 3,000 psi / 207 bar / 21 MPa
Max Vacuum 10 inHg / 255 mmHg
Min Temperature -0 °F / -18 °C
Max Temperature 130 °F / 54 °C
Pressure Media Nitrogen, inert gas
Fine Adjustment Resolution .0005 PSI
Fill Vent Valves soft seated construction
Mechanical Rotation 42 turns (pressure balanced)
Cylinder Capacity 15.20 Sq Ft
Overpressure Relief 3,300 psi / 228 bar / 23 MPa
Internal Connections 1/8 in tubing (316 stainless steel)
Inlet Port Male Quick-test with cap and chain
Media Compatibility Air
Inert Gas
Natural Gas
Outlet Port Male Quick-test with cap and chain
Seal Materials Buna-N
Delrin
Teflon

Process Connection 1 QTHA-2MB0

Has Check Valve No
Materials Brass
Max Pressure 5,000 psi / 345 bar / 34 MPa
Max Temperature 225 °F / 107 °C
Max Vacuum 0.00 inHg / 0.00 mmHg
Min Temperature -0 °F / -18 °C
Seal Materials Buna-N
Wrench Size 9/16 In
Wrench Size 15 mm

Hose 2 QTQT-HOS-3ft

Burst Pressure 27,000 psi / 1,862 bar / 185 MPa
Color Silver
Fluid Media Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water
Inner Diameter 0.08 in / 0.20 cm
Length 3 ft / 91.44 cm
Materials Brass
Max Pressure 6,900 psi / 476 bar / 48 MPa
Max Temperature 140 °F / 60 °C
Max Vacuum 0.00 inHg / 0.00 mmHg
Min Temperature -40 °F / -40 °C
Minimum Bend Radius 1.00 in / 2.54 cm
Outer Diameter 0.20 in / 0.51 cm
Type QT

Hose 1 QTQT-HOS-6ft

Burst Pressure 27,000 psi / 1,862 bar / 185 MPa
Color Silver
Fluid Media Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water
Inner Diameter 0.08 in / 0.20 cm
Length 6 ft / 1.83 m
Materials Brass
Max Pressure 6,900 psi / 476 bar / 48 MPa
Max Temperature 140 °F / 60 °C
Max Vacuum 0.00 inHg / 0.00 mmHg
Min Temperature -40 °F / -40 °C
Minimum Bend Radius 1.00 in / 2.54 cm
Outer Diameter 0.20 in / 0.51 cm
Type QT

Included Items

FieldLab AC Power Charger Kit

FieldLab AC Power Charger Kit

DGAU-0163

USB cable, Straight A x Right Angle B, shielded, grey, 2 meters long

USB cable, Straight A x Right Angle B, shielded, grey, 2 meters long

DGAU-0191

FieldLab Carrying Case

FieldLab Carrying Case

DGAU-0370

Replacement Parts

NPAK Tank valve block, aluminum

NPAK Tank valve block, aluminum

NPAK-0001

NPAK Fill port assembly, male Quick-test with cap and chain S.S. (for #1)

NPAK Fill port assembly, male Quick-test with cap and chain S.S. (for #1)

NPAK-0002

NPAK Overpressure burst disk (3000 psi / 200 pressure range)

NPAK Overpressure burst disk (3000 psi / 200 pressure range)

NPAK-0004

NPAK System Fill Valve assembly, knob, panel nut (for #2)

NPAK System Fill Valve assembly, knob, panel nut (for #2)

NPAK-0006

NPAK Supply (#6) and Vent (#8) valve assembly, knob, panel nut

NPAK Supply (#6) and Vent (#8) valve assembly, knob, panel nut

NPAK-0008

NPAK fine adjust assembly without piston, knob, panel nut (for #7)

NPAK fine adjust assembly without piston, knob, panel nut (for #7)

NPAK-0010

NPAK fine adust piston only (for #7)

NPAK fine adust piston only (for #7)

NPAK-0012

NPAK Valve Block (for #6 and #8)

NPAK Valve Block (for #6 and #8)

NPAK-0014

3000 psi / 210 bar dual scale pressure gauge (for #4 and #5)

3000 psi / 210 bar dual scale pressure gauge (for #4 and #5)

NPAK-0016

NPAK top portion of fine adjust assembly without piston (for #7)

NPAK top portion of fine adjust assembly without piston (for #7)

NPAK-0020

NPAK tank clamps, bracket and attachment bolts

NPAK tank clamps, bracket and attachment bolts

NPAK-0030

NPAK nitrogen cylinder (15.2 cu. ft / 430 l @ 3000 psi)

NPAK nitrogen cylinder (15.2 cu. ft / 430 l @ 3000 psi)

NPAK-0035

NPAK replacement gas regulator (for #3)

NPAK replacement gas regulator (for #3)

NPAK-0040

NPAK tube connecting tank fill to regulator, with tube fittings

NPAK tube connecting tank fill to regulator, with tube fittings

NPAK-0045

NPAK tube connecting tank fill valve to "tank pressure" gauge

NPAK tube connecting tank fill valve to "tank pressure" gauge

NPAK-0050

NPAK tube connecting regulator to fine adjust vernier assembly

NPAK tube connecting regulator to fine adjust vernier assembly

NPAK-0055

NPAK tube connecting regulator to "regulated pressure" gauge

NPAK tube connecting regulator to "regulated pressure" gauge

NPAK-0058

NPAK tube connecting to top of fine adjust vernier, tube fittings

NPAK tube connecting to top of fine adjust vernier, tube fittings

NPAK-0060

NPAK tube connecting to bottom of fine adjust vernier, tube fittings

NPAK tube connecting to bottom of fine adjust vernier, tube fittings

NPAK-0065

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #9)

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #9)

NPAK-0070

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #10)

NPAK Outlet port assembly, male Quick-test with cap and chain, S.S. (for #10)

NPAK-0075

NPAK gauge compartment with foam liner

NPAK gauge compartment with foam liner

NPAK-0080

NPAK replacement control panel

NPAK replacement control panel

NPAK-0085

NPAK replacement case with reinforced steel panel ring

NPAK replacement case with reinforced steel panel ring

NPAK-0090

NPAK bag to hold hoses and adapters in Nitropak, zippered nylon with Velcro

NPAK bag to hold hoses and adapters in Nitropak, zippered nylon with Velcro

NPAK-HSBG-VC

NPAK Cap, plug, chain and hanger ring to cover inlet, outlet ports, S.S.

NPAK Cap, plug, chain and hanger ring to cover inlet, outlet ports, S.S.

AS-QTFT-CAPS

Looking for product pricing and availability?
Contact us for a quote and we'll be in touch.
Get a Quote
Distributors log in for pricing and availability

© Copyright 1997 - 2018 Ralston Instruments. All rights reserved. Privacy Policy