Part Number: QTHA-ABS0
M6 x 0.75MM x male Quick-test, no check-valve, S.S.
Connect a Quick-test hose directly to a DP transmitter or gauge valve using the bleeder port when the transmitter is not mounted on a 3 valve manifold or gauge valve or when the manifold is not easily accessible.
Specifications
| Weight | 0.85 oz / 24 grams |
|---|---|
| Length | 2.16 in / 55 mm |
| Width | 0.56 in / 15 mm |
| Height | 0.56 in / 15 mm |
| Compatible with | ABB 266DSH, ABB 266DRH, ABB 266MRT, ABB 266MST |
| Country of origin | USA |
| Materials | Stainless Steel |
| Max Operating Temperature | 140 °F / 60 °C |
| Max Pressure | 5000 PSI / 350 bar / 35 MPa |
| Max Vacuum | 0 InHg / 0.0 kPa |
| Media Compatibility | Ethylene Glycol, Hydraulic Oil, Inert Gas, Mineral Oil, Natural Gas, Petroleum Based Oil, Skydrol, Windshield washer fluid, Transmission fluid, Light motor oil, Ralston Calibration Oil, Water |
| Min Operating Temperature | 0 °F / -18 °C |
| Seal Materials | Buna-N |
| Wrench Size | 9/16 In / 15 mm |
| Wrench Size | 15 mm / 9/16 in |
| End 1 Connector | M6 X 0.75 MM Male DP Transmitter/Gauge valve |
| End 1 Direction | Left |
| End 2 Connector | Male Quick-test |