Part Number: 2L2L-HOS-10m
Quick-test hose, 1/4" Female AN S.S. hose ends, 10m long
Microbore hoses that provide a very quick, low volume, high pressure way of connecting to any pressure instrumentation, hand pump, calibration source or device under test
Specifications
| Weight | 11.6 oz / 330 grams |
|---|---|
| Length | 593.7 in / 16 m |
| Width | 0.79 in / 21 mm |
| Height | 0.79 in / 21 mm |
| Burst Pressure | 20000 PSI / 1380 bar / 140 MPa |
| Color | Silver |
| Country of origin | USA |
| Fluid Media | Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water |
| Hose Length | 10 m / 32.80 ft |
| Inner Diameter | 0.08 In / 3.00 mm |
| Materials | Stainless Steel |
| Max Operating Temperature | 140 °F / 60 °C |
| Max Pressure | 5000 PSI / 350 bar / 35 MPa |
| Max Vacuum | -30 InHg / -101.6 kPa |
| Media Compatibility | Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water |
| Min Operating Temperature | -40 °F / -40 °C |
| Minimum Bend Radius | 1 In / 26 mm |
| Outer Diameter | 0.2 In / 6.00 mm |
| Seal Materials | Buna-N, Teflon |
| Type | QT |
| Hose End 1 | Female 37 Degree flare (AN/JIC) Quick-connect |