Adapters
Quick-test hose and adapters seal via an O-ring and probe. The probe slides into the O-ring and provides the seal while the threads keep the probe in place. This simple and reliable method allows for leak-free connections in any calibration.
Find the Exact
Adapter for the Job
Find the right adapter for your connection quickly and easily using our new adapter search.
Browse all Adapter Categories
NPT Male Quick-test Adapters
Connects Female NPT to Quick-test hoses with brass or stainless steel hose ends.
NPT Male Quick-connect Adapters
Make a bubble-tight seal on any Female NPT pressure device without using thread sealant or a wrench.
NPT Male Quick-test XT Adapters
Connects Female NPT to Quick-test XT 10,000 psi hoses
NPT Male Quick-test Fittings
A removable cap provides easy access to connect a Quick-test hose to the process for calibration purposes and is easily sealed bubble-tight again when calibration is complete
NPT Male Quick-connect Fittings
Make calibrating pressure transmitters a snap by eliminating the need for thread sealant or wrenches when connecting to any female NPT connection
NPT Male Quick-test XT Fittings
Connects Female NPT to Quick-test XT 10,000 psi hoses for permanent installation
NPT Male Quick-test Pressure Calibrator Adapters
Quickly connect a pressure calibrator or other pressure device with Female NPT connections to Ralston hand pumps or nitrogen calibration equipment
NPT Male Quick-test XT Pressure Calibrator Adapters
Quickly connect a pressure calibrator or other pressure device with Female NPT connections a to Ralston hand pump or nitrogen calibration equipment to 10,000 psi
NPT Female Quick-test Adapters
Connect a Quick-test hose to a pressure gauge or any device with a male NPT connection using thread sealant and a wrench
NPT Female Quick-test XT Adapters
Connect a Quick-test XT hose to an NPT pressure gauge or any Male NPT device using thread sealant and a wrench
NPT Female Quick-test Gauge Adapters
Connect to a pressure gauge or other device with Male NPT connections to a Ralston hand pump or nitrogen calibration device
NPT Female Quick-test XT Gauge Adapters
Connect Male NPT pressure gauge or other Male NPT device to a Ralston hand pump or nitrogen calibration device to create one side of a quick-disconnect to 10,000 psi
NPT Female Quick-connect Adapters
Connect Quick-test hoses to a male NPT pressure gauge. It allows one to connect a hose to a pressure gauge, calibrate it and remove it without a wrench or thread sealant.
NPT Female Quick-test Bulkhead Unions
Connect a hose on one side of a panel, wall or enclosure with female NPT on the other side
Tube Fitting Quick-test Adapters
Make a bubble-tight connection to any Swagelok, Parker, Hoke, SSP, Tylok or equivalent tube fitting without a wrench
Tube Fitting Quick-test Bulkhead Unions
Connect a Quick-test hose on one side of a panel, wall or enclosure and a tube fitting on the other
37 degree Flare (AN/JIC) Quick-connect Adapters
Connect a male 37° flare AN/JIC fitting to a Quick-test hose without a wrench
DP Transmitter Quick-test Adapters
Connect a Quick-test hose directly to a DP transmitter using the bleeder port when the transmitter is not mounted on a 3 or 5 valve manifold or when the manifold is not easily accessible.
DP Transmitter Quick-test Fittings
Ideal for situations where frequent calibration of a DP transmitter using the bleeder port is required
BSPP Male (RS) Quick-test Adapters
Connect Female BSPP (ISO 228/1) parallel thread to Quick-test hose for temporary installation
BSPP Male (RS) Quick-test XT Adapters
Connect Female BSPP (ISO 228/1) parallel thread to Quick-test XT 10,000 psi hose for temporary installation
BSPP Male (RS) Quick-test Fittings
Connect Female BSPP (ISO 228/1) parallel thread to Quick-test hose for permanent installation where frequent calibrations are performed
BSPP Male (RS) Quick-test XT Fittings
Connect Female BSPP (ISO 228/1) parallel thread to Quick-test XT 10,000 psi hose for permanent installation where frequent calibrations are performed
BSPP Female (RG) Quick-test Adapters
Connect Male BSPP (ISO 228/1) parallel thread to Quick-test hose for temporary installation
BSPP Female (RG) Quick-test Gauge Adapters
Connect Male BSPP (ISO 228/1) parallel thread pressure gauge or other Male BSPP device to a Ralston hand pump or nitrogen calibration equipment
BSPP Female (RG) Quick-connect Adapters
Connect directly to the bottom of BSPP pressure gauges without a bonded seal or crush washer
BSPT Male (RT) Quick-test Adapters
Connects Female BSPT (ISO 7/1) taper pipe thread to Quick-test hose using thread sealant and a wrench
BSPT Male (RT) Quick-test Fittings
Connects Female BSPT (ISO 7/1) taper pipe thread to Quick-test hose using thread sealant and a wrench
BSPT Female (RT) Quick-test Adapters
Connect to any Male BSPT (ISO 7/1) taper thread connection using thread sealant and a wrench
Medium Pressure Quick-test Adapters
Connect to any Medium Pressure connection
Medium Pressure Quick-test XT Adapters
Connect to any medium pressure connection
High Pressure Quick-test adapters
Connect a Female High Pressure 60 degree coned and threaded pressure fitting to a Quick-test hose
High Pressure Quick-test XT Adapters
Connect a Female 60 degree coned and threaded pressure fitting to a Quick-test XT 10,000 psi hose
Minimess Quick-test Adapters
Connect a Ralston Quick-test hose to a 1620 connection
Metric Male Quick-test Adapters
Connect to Female Metric thread comparators, pressure pumps and devices under test
SAE/MS Male Quick-test Adapters
Connect to SAE/MS ports on pressure calibrators, pipelines and other processes
Metric Female Quick-connect Adapters
Connect a pressure gauge with Metric male parallel thread to a Quick-test hose
Quick-test Unions
Connect two Quick-test hoses or two Quick-test adapters together, depending on the union
Quick-test XT Unions
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily
Quick-test Bulkhead Connections
Excellent for safely connecting two Quick-test hoses through an enclosure, truck, or panel wall
Quick-test XT Bulkhead Connections
Excellent for safely connecting two Quick-test XT 10,000 psi hoses through an enclosure, truck, or panel wall
Quick-test 90° Elbows
Connect a hose to an adapter that is in a hard to reach place
Quick-test 45° Elbows
Connect to pressure gauges, pressure calibrators and adapters easily and quickly
Quick-test XT Tees
Connect 3 Quick-test XT 10,000 psi hoses together without a wrench or thread sealant
Quick-test Tees
Connect three hoses or a combination of 3 hoses, adapters and hand pumps or manifolds
Quick-test Cap and Chains
Cap and chain for any male Quick-test adapter with a cap and chain
Quick-test XT Cap and Chains
Turn any Quick-test XT adapter into a permanent installation with the addition of a cap and chain
Replacement Gauge Swivels
Use to mount gauges on Ralston Instruments model APGV, HPGV, XHGV hand pumps
Replacement Outlet Ports
Outlet ports used on hand pumps, nitrogen sources, volume controllers